In space-constrained offices and small server rooms, deploying standard 19-inch networking equipment can pose a logistical challenge. A 2U vertical wall-mount cabinet addresses that problem by orienting equipment parallel to the wall, reducing the footprint required for small network nodes and edge computing installations.
Product overview and applications
The vertical wall-mount enclosure is designed for 19-inch-wide networking equipment and provides 2U of mounting height. Its vertical architecture positions device panels parallel to the wall, limiting how far the cabinet protrudes into a room. The design is intended for corridors, small offices, home network centers and cramped telecommunications closets.
Constructed from 2.0 mm SPCC cold-rolled steel with a powder-coated finish, the cabinet is rated to support up to 30 kg (66 lbs). The published specifications list square-hole punched rails and a rear cable opening for routing wiring into the enclosure.
Core technical specifications
The cabinet’s key dimensions and load ratings are summarized in the manufacturer’s published specifications.
| Parameter |
Specification |
| Material |
2.0 mm SPCC cold-rolled steel |
| Mounting height |
2U |
| Dimensions |
7.8H x 19.2W x 4.2D in. |
| Maximum load |
30 kg (66 lbs) |
| Mounting method |
Square-hole punched rails |
| Cable access |
Rear cable opening (12.60 x 2.95 in.) |
| Product weight |
2.26 kg (5 lbs) |
The cabinet is listed at 2.26 kg (5 lbs). Its 2U mounting height and 4.2-inch depth are intended for shallow wall-mounted installations, provided that device connectors and cable bend radius are considered.
Compliance and certification
The enclosure is designed to meet ANSI/EIA RS-310-D, which governs standard 19-inch equipment spacing. It also is listed as compliant with IEC 60297-2 and DIN 41494 for rack structure and dimensions. Environmental compliance includes RoHS and REACH directives.
Installation considerations
Before installation, users should confirm that the wall material can support the combined weight of the cabinet and mounted equipment. The package includes M6 screws, washers and floating nuts for securing devices, but it does not include wall-fixing hardware. Appropriate expansion bolts or self-tapping screws must be selected for concrete, wood studs or drywall.
The rear cable opening measures 12.60 by 2.95 inches. Installers should plan cable routing before mounting to preserve access for maintenance and avoid sharp bends.
Frequently Asked Questions
Is the cabinet compatible with all 19-inch network equipment?
It supports equipment built to the 19-inch standard, but because devices are mounted vertically, installers must consider device depth and port orientation. The 4.2-inch cabinet depth may require care to prevent excessive cable bending at connectors.
Does the package include wall-mounting hardware?
No. The package includes M6 screws, washers and floating nuts for mounting equipment, but wall-fixing hardware must be purchased separately and matched to the wall material.
Does the 30 kg load rating include the cabinet’s own weight?
The rated load generally refers to the total weight of supported equipment. Because the cabinet weighs 2.26 kg (5 lbs), installers should account for both the equipment and cabinet weight and verify that the wall structure can safely bear the combined load.
Por favor verifique seu email!
